Our Products
Hot Plate Vacuum & Pressure Lamination Forming Machine (TFH Series)
Premium Surface Finishing Solution to Maximize Product Value — Hot Plate Vacuum & Pressure Lamination Forming Machine (TFH Series)
This high-performance vacuum and pressure lamination machine precisely applies high-functional plastic sheets onto various substrates, such as injection-molded parts. It significantly elevates the visual aesthetics and durability of raw materials, providing an optimal solution for industries requiring flawless, premium finishes, including home appliances, building materials, and automotive components.
Key Advantages of the TFH Series
Exceptional Temperature Stability & Precision Alignment
Heating the sheet while securely fixed to the hot plate ensures uniform and stable temperature distribution across the entire surface.
Enables precise alignment of pre-printed patterned or textured sheets, drastically reducing defect rates.
Short heating times optimize and shorten production cycle times.
Powerful High-Pressure Forming up to 0.97 MPa
Delivers a maximum compressed air pressure of 0.97 MPa, forcing the sheet to wrap perfectly around complex 3D contours and deep recesses.
Maximizes bonding strength between the substrate and the sheet, preventing peeling or lifting for a flawless finish.
Automatic Edge Trimming Technology
Equipped with Asano Laboratories’ proprietary technology, the outer edges are neatly cut (trimmed) simultaneously as the forming process completes. This minimizes post-processing steps and streamlines production.
Applications & Materials
Key Applications: Home appliance housings, premium architectural interior/exterior claddings, automotive interior/exterior parts, etc.
Compatible Sheet Materials: High-performance plastic sheets including HIPS, ABS, PC, PP, and PET.
Specifications & Product Lineup
- Forming Method : Vacuum and Pressure Forming
- Sheet Feeding Drive : Air Cylinder Drive
- Heater Type : Cartridge Heater
- Forming Table Drive : Air Cylinder Drive
| Model | Max Forming Area (mm) | Mold Height (mm) | Max Pressure |
|---|---|---|---|
| TFH-0121 | 170 × 120 | 50 | MAX 0.9 MPa |
| TFH-0221 | 250 × 180 | 100 | MAX 0.9 MPa |
| TFH-0621 | 600 × 600 | 190 or less | MAX 0.97 MPa |
| TFH-1221 | 550 × 1250 | 230 or less | MAX 0.97 MPa |